Beschrijving
Details
Op veler verzoek hebben we nu een reeks onbemande nitro radiografisch bestuurde carkits in voorraad voor diegenen die ervan houden om modellen te bouwen, net zoals ze gebruiken! Vergeet Lego etc, deze zelfgebouwde kits zorgen voor urenlang speelplezier en als ze klaar zijn, zijn ze zelfs leuk om te gebruiken! Voor de uren van gebruik en genot die je krijgt bij het eerste bouwen en vervolgens racen, bieden deze kits een geweldige prijs-kwaliteitverhouding..
We verkopen sommige van deze modellen aan scholen omdat ze educatief zijn en een geweldige introductie tot mechanica en engineering. er is geen ander product op de markt dat zo'n complete all-in-the-box-set als deze levert. In tegenstelling tot andere zelfbouwpakketten op de markt die alleen het basischassis en geen van de elektronica enz. bevatten, bevatten deze kits alles wat nodig is om te voltooien en zelfs de gereedschappen die u nodig hebt om ze te bouwen! sh 18-motor, pistoolapparatuur, vet, olie enz. - alles is aanwezig. de bouw duurt gemiddeld 8 - 12 uur en wordt aanbevolen voor kinderen vanaf 14 jaar.
Het belangrijkste bij een zelfbouwset is de handleiding. Met deze kits is er in de handleiding veel aandacht besteed aan een soepele constructie. Dit is niet een paar pagina's pamflet zoals met sommige andere kits, dit is een dikke handleiding die is ontworpen en geschreven in het Verenigd Koninkrijk om ervoor te zorgen dat er niets verloren ging in de vertaling in de fabriek. De constructie wordt opgesplitst in verschillende fasen, waarbij de onderdelen van elke corresponderende stage afzonderlijk worden verpakt, zoals hierboven weergegeven. De stappen worden duidelijk weergegeven met CAD 3D-afbeeldingen waarbij elk onderdeel afzonderlijk wordt gelabeld. Het eindresultaat is de Condor off-road buggy. Een uiterst capabel offroad-model met een sterk aluminium chassis, een asaangedreven 4WD-systeem, olie gevulde schokdempers, voorste en achterste differentiëlen en afgedichte radiotray..
De Condor wordt aangedreven door een Taiwan SH maat 18 motor die het model raket naar meer dan 40 mph. De buggy kan worden geüpgraded met een reeks prestatiehoppen die beschikbaar zijn op onze site en je kunt zelfs een versnellingsbak met twee versnellingen monteren om het nog sneller te maken!!
ALLES WAT NODIG IS OM TE BOUWEN INBEGREPEN
Zelfs de gereedschappen en oliën.
GEDETAILLEERDE STAPSGEWIJZE INSTRUCTIES
Handleiding geschreven in het Verenigd Koninkrijk.
LEREN OVER VERBRANDINGSMOTOREN EN MECHANICA
Educatief en leuk, gebruikt in scholen als een leuke lesoefening.
MEER DAN 400 STUKS VOOR URENLANG SPEELPLEZIER
14 tassen met 14 stadia van spannende ervaring.
GENIET ERVAN OM HET NET ZO TE BOUWEN ALS HET TE GEBRUIKEN
Het is een levenslange ervaring voor kinderen om hun eigen nitro-model samen te stellen.
2.4GHZ RADIO SET
Hiermee kunnen meerdere modellen in hetzelfde gebied worden gebruikt zonder interferentie.
HALVERWEGE DE BOUW
Geweldige manier om kinderen betrokken te houden.
BODY SHELL
De laatste stap sneed body shell om de build te voltooien.
BOUW COMPLEET
De buggy is klaar om te zijn.
Specificaties & Kenmerken
Extra informatie
Artikelnummer | A3001 |
---|---|
Fabrikant | Acme-Tech |
Schaal | 1:10 |
Bouwen | Zelfbouw Kit |
Rijden | 4WD |
Voor Terrein | Off Road |
Radio Aparatuur | 2.4 GHz |
Type | Buggy |
Motor / Engine | .18 Nitro |
Specificaties |
|
Functies |
|
Heb Je Nodig Om Het Te Gebruiken |
Optioneel: dit model wordt geleverd met een AA-aangedreven Glow starter, maar de upgrade van een oplaadbare Glow starter set is hierboven beschikbaar in gerelateerde producten. |
Q&A
Vragen:
Vraag:
Kan hierzo normale benzinr in met 2 takt olie zo ja welke mix zo nee wat voor een nitro mix moet ik anders kopen? Mvg bart
Antwoorden:
- Gepost dooropHallo, u moet voor dit model nitrobrandstof gebruiken. Dit kan worden gekocht bij elke plaatselijke hobbywinkel.
Parts & Upgrades
Reserveonderdelen
LEVERING INFORMATIE
LEVERING INFORMATIE
Leveringskosten en tijd zullen afhangen van de grootte van de bestelde artikelen
RESERVEONDERDELEN
Zij zullen tussen de 2-5 werkdagen duren. De kosten zijn afhankelijk van het aantal onderdelen en de grootte.
Germany: €3.70 - €7.40
Spain: €7.40 - €13.30
France: €7.40 - €11.80
Ireland: €7.40 - €8.90
Italy: €7.40 - €13.30
Netherlands: €5.95 - €8.99
Portugal: €7.40 - €10.30
Denmark: 42kr. - 72kr.
Sweden: 52.80kr - 105.60kr
NORMALE GROOTTE MODELLEN
Dit omvat niet zeer grote voorwerpen zoals elektrische fietsen, grote scooters en quads. Levering duurt 2-5 werkdagen.
Germany: €7.40
Spain: €9.99
France: €8.99
Ireland: €7.40
Italy: €9.99
Netherlands: €8.99
Portugal: €9.99
Denmark: 72kr.
Sweden: 105.60kr
ZEER GROTE OBJECTEN
Zeer grote voorwerpen zoals elektrische fietsen, grote scooters en quads. Levering duurt 2-5 werkdagen.
Germany: €49.90
Spain: €49.90
France: €49.90
Ireland: €49.90
Italy: €49.90
Netherlands: €49.90
Portugal: €49.90
Denmark: 499kr.
Sweden: 499kr.
32 klanten-reviews
Fiddly But Fun
Per mark May 24, 2020I bought the self build kit as a joint present for my 13yr, 11yr old sons (and myself) for Christmas. Took us about 3 days, 3 or 4 hours per day off and on to build it together. The boys really enjoyed building it and learning about the differential and how the shocks worked and filled with oil.
Starting the car in December outside was a challenge on account of it being too cold. We found this guide on line which properly explained how the carburetor works and how to set it up https://www.nitrotek.co.uk/blog/2015/12/06/the-definitive-10-step-guide-on-how-to-start-your-nitro-rc-car/ but still struggled. Eventually I found that heating the engine block up with a hair dryer to get it warned up made it easier to get it going and run the engine in.
Once we'd got it going we had to fiddle with a combination of the low idle and throttle adjustment on the controller to prevent it driving off on it's own.
Now in lockdown in spring (bit Warner) it's been great fun getting it going again on a playing fields taking it in turns. It's pretty fast and quite easily copes on a bumpy grassy field bombing around.
All in all if you want a project and are happy to fiddle with it to get it going and are interested in learning about RC cars and how they work then I'd recommend this as a great way to while away many an afternoon with the kids.o
Per Morgan April 16, 2020very good buggy, very fast, much fun making it. a lot of plastic parts.
good for beginners
Per conrad October 26, 2014i got this for my birthday and spent a long weekend building it,the engine was a little hard to start but once it did it was nothing but fun.
Great first time item for newbies.
Per Adam May 07, 2014This is without a doubt a great first time buy for anyone looking to dabble in the world of RC cars. putting it together took around a week and without only a few annoyances where the car nearly met the wall.
Pros:
Great value
good for a project
loads of fun and interaction whilst building it and after
All round a definite buy for first timers like me
Cons:
A lot of the pieces are plastic therefore relatively easy to break when driving it around (I have already had to replace the front suspension with the metal ones as it snapped).
Some extremely fiddly DIY at times where I had to get more than one pair of hands involved to get the job done.
Been running it now for nearly 6 weeks and I found the engine is a bit fiddly to find that sweet spot. I am still playing around with it and it is getting a tad annoying as its not as simple as starting it up, having a 5 - 10 minute fiddle then off you go. If the carburettor isn't set properly then it will either die after a few seconds or the car will want to go before you even get your finger on the accelerator, which brings me onto the carburettor. I am now experiencing problems with the screw holding the air cover in place meaning I have no way of setting the carburettor correctly until I resolve this...which I will.
So in summary; a great buy, just what I wanted (something fiddly, and time consuming with a lot to get out of it), a way to get slightly more mechanically minded, a long term hobby, but one that I would recccomend upgrading certain parts of, i.e plastic suspension to metal etc.
I highly recommend it but if your looking for something a bit more reliable I would go for the already built models.
Don't let the little issues put you off, after all, there are going to be set backs and if it wasn't the way it was then it wouldn't be worth it. You wouldn't discard your car if it suddenly annoyed you for any small or large reason.
NITROTEK SAYS - Thanks for the great review. If you are having to adjust the carb before each use it means that probably one of your screws on the engine or exhaust are loose. Because if there is a loose screw then air starts to get into the engine which messes the settings up. Tighten the loose screw and then no air can get in so the carb settings will stay the same.jolie
Per jojo14op May 07, 2014super très intérésant